Dealycheap.com : Deals with Cheap Everyday Low Prices

This is a very substantial mount with CHEETAH MOUNTS PLASMA LCD FLAT SCREEN TV ARTICULATING FULL MOTION DUAL ARM WALL MOUNT BRACKET FOR 32-55″ DISPLAYS UP TO 165LBS BLACK and heavy guage steel. The arms extend over 20″ from the wall yet fold to less than 5″. Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 55″ and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 19″ wide and has wide slots making it easy to mount into standard 16″ studs even if they are not exactly 16″ apart. Thus, the arms may be visible on the sides of 32″ units. The universal design will fit any display with a hole pattern up to 26.3″ wide and 18″ tall. The wall plate is 1/8″ thick and very stable and includes a large center hole for cable pass-though into the wall. This mount will swivel approximately 150 degrees depending on the size of your display. Dual TV locking screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included.

CHEETAH MOUNTS PLASMA LCD FLAT SCREEN TV ARTICULATING FULL MOTION DUAL ARM WALL MOUNT BRACKET FOR 32-55″ DISPLAYS UP TO 165LBS BLACK

CHEETAH MOUNTS PLASMA LCD FLAT SCREEN TV ARTICULATING FULL MOTION DUAL ARM WALL MOUNT BRACKETFeatures and Technical Details

See more TV Wall Mounts and TV Accessories Cheap

Customer Reviews

Excellent Wall Mount,By Condo Dweller “Fredot”

I looked for Wall Mounts to hang my 52″ TV. All the mounts I found were very expensive. Then I found this one. This is as good or better that any I’d seen at local stores. The price is phenominal. Most of the mounts I looked at were much higher in price. This was easy to hang. Due to the mount’s weight, you’ll need another person. The hardware supplied was ok except that my apartment walls are an inch thick. So, I had to purchase 4 longer toggle bolts for thicker walls. Other than that, I had no problem with installation. I have a 52″ TV. When the TV was hung on the mount, the weight of the TV did not move the mount at all. I am very happy with this product and recommend it highly.

Ther Perfect Balance of Price, Quality and Functionality,By Jimbo “Mad Scientist”

I purchased this wall wount for my 52″ Sony Bravia LCD which weighs about 80 lbs and it worked out perfectly. The cost was $69.99. First of all the mount that arrived was as pictured on the Amazon website and it is solidly constructed and comes with an abundance of hardware for mounting. I was able to use the 4 supplied lag bolts to go directly into the 16″ spaced studs behind the wall. The holes on the back of the mount allow a deviation of from about 14″ to 17″ spacing of the wall studs. It was simple to predrill the holes so that the mount would be level and easily screwed/bolted into the wall. DO NOT trust the built in level or the supplied level (bubble). These are inaccurate and you are better off using a 2 foot level to do the job. Also, be sure to hit the center of the stud which will typically be 3/4 inches in width; you want to be as close to the center of that piece of wood as possible. If you are installing into a masonry wall, the hardware is provided.

I was mounting it between two built-in wall units and wanted the LCD to be centered. This was not a problem despite the fact that the wall studs were not centered. The mount allows some flexibility for this in the way that the mounting holes are positioned along with the fact that the LCD can be “hung” off center.

Once the mount is secured to the wall and the mounting brackets are fastened to the LCD, two of us lifted the unit and hung it on the bracket without any trouble. Tightening two “set screws” secure the brackets of the LCD to the mount and it is ready to go. One other comment on the supplied washers: I agree with previous posters that they are flimsy. You can purchase heavier gauge ones or just double up on the supplied ones.

My wife and I love the articulating mount. It allows the LCD to be tilted left/right/down and pulled away from the wall if desired a fair number of inches. When pushed back all the way to the wall, the back of the LCD is about 4″ away from the wall.

I believe the contruction and strength are more than adequate and the only comment on that is that the front mounting plate that holds the LCD could be a tad thicker (heavier gauge sheet metal). All in all, this mount does a lot, is easy to intall, is well made with above average construction and has a great price. I would recommend this product.

Good product, but…..,By J. LiaoI got this tv mount few weeks ago, and it is a good one. However, I really think the company can produce a better instruction manual, since it can be hard to follow sometimes. Another thing is that the hardware it comes with is pretty much useless if your TV is a bit larger. We had to buy quite a few things to make everything work.

Great wall mount,By K. Hudgins

This wall mount is a good value. After I installed it I hung on it and did a few pull ups on it. It didn’t even budge! I also just used the hardware that they give you in the box. You can purchase it from a hardware store if your not sure about the quality of it but it works just fine. It’s a little stiff moving it from the wall, and I haven’t been able to move it around more to loosen it up. I’ll do a follow up to this review on moving it around more. I really haven’t been home that much to do that.

awesome for the price,By William J. Howard “jay”

what a great product for the price. i would recommend this to anyone. look all you want you are not going to find a better flat screen mount for the price.

GREAT MOUNT,I OWN TWO AND I AM VERY HAPPY.,By Tony Cocha “TC”

GREAT MOUNT I OWN TWO,VERY SURPRISED WITH THE QUALITY OF THIS MOUNT WITH A PRICE YOU CANT BEAT.

Nice heavy-duty TV mount,By Tympanuchus “Tympanuchus”

I am using this mount to hang my PN50B650 50″ Samsung plasma, and it works great! I was a little concerned about the reviews on the mounting hardware saying they were brittle and weak but the lag screws worked just fine for me and I even hung on the mount (200 pounds) once it was installed to be sure it could easily handle an 85 pound TV! Mounting was simple once you find your stud centers (which is very important). Even if you’re not quite level on your mounting, the mount is adjustable to account for that. The level that comes with the mount is junk so use your own, it’s a nice gesture I guess ;) All in all, this is a nice, heavy duty mount that I would buy again and recommend to friends.

Good, Sturdy Product,By John E. Cleary “puttshort”

This product is a good, heavy duty mount. As I had to secure the mount into a (Year 1979)wall with 1 3/8″ thick metal studs there were some problems to overcome. To make the job easier I removed the backing plate from the assembly and secured it to the (reinforced) joists with 5/16″ threaded rod… and then the leveling and lifting was easy for one person. After attaching the balance of the mount, the level remained true… and was within 1/16″ of true when the 52″ Samsung was mounted….. a shim in the mount corrected the 1/16″ error. I am very satisfied. John C.

STRONG!!! Great price.,By Richard Kline “CptCrusty1″

The only complaint I have isn’t the fault of the mmanufacturer. The studs on the wall I used weren’t done right and the unit had some trouble with it. Nothing I couldn’t handle tho. That being said, I installed and was able to pull myself off the floor with it (in the close position, I’m 220 so the extented position wouldn’t work…LOL).

It’s very strong, can’t say that enough. I had to use a little graphite to free up the movement a bit though. It’s new. Great Product. Great price… can’t say enough.

CHEETAH MOUNTS PLASMA LCD FLAT SCREEN TV ARTICULATING FULL MOTION DUAL ARM WALL MOUNT BRACKET FOR 32-55″ DISPLAYS UP TO 165LBS BLACK